How to read capacitor codes
How capacitor markings work
C = digits × 10^multiplier pF
Small ceramic and film capacitors carry a 3-digit code in picofarads: the first two digits are the value and the third says how many zeros follow. 104 is 10 followed by four zeros, 100 000 pF, which is 100 nF or 0.1 µF.
A letter after the code gives the tolerance: F ±1%, G ±2%, J ±5%, K ±10%, M ±20%, Z +80/−20%. Below 10 pF, B, C and D mean ±0.1, ±0.25 and ±0.5 pF. A digit-letter pair such as 2A is an EIA voltage code: 1H is 50 V, 2A is 100 V, 2E is 250 V, 2J is 630 V.
Other styles exist: RKM markings put the unit where the decimal point goes (4n7 = 4.7 nF, p68 = 0.68 pF), film capacitors often print the value directly in µF (.047 = 0.047 µF), and a plain 2-digit number such as 47 is simply 47 pF.
Worked example: a film capacitor marked 474J 2A
A blue box capacitor is marked 474J 2A. Split the marking into its three parts.
- 474: value code
47 × 10⁴ pF = 470 000 pF = 470 nF = 0.47 µF - J: tolerance
±5% → 446.5 nF … 493.5 nF - 2A: voltage code
2A = 100 V
It is a 0.47 µF capacitor, ±5%, rated 100 V DC.
Common mistakes
Reading the code in microfarads or nanofarads
The 3-digit code is always in picofarads. 104 is 100 nF, not 104 µF or 10 nF.
Taking the tolerance letter for a unit
K in 103K is ±10%, not kilo, and M is ±20%, not mega. 103K is 10 nF ±10%.
Ignoring the voltage rating
A replacement must be rated at least as high as the original. On mains-side parts look for an X2 or Y2 safety rating as well, not just the voltage.
Assuming every ceramic capacitor keeps its value
X7R, X5R and especially Y5V lose capacitance with temperature and applied DC voltage. Use C0G (NP0) in filters and timing circuits that must stay accurate.
Capacitor code FAQ
10 followed by four zeros in picofarads: 100 000 pF, which is 100 nF or 0.1 µF. It is the classic decoupling capacitor placed next to every chip.
10 000 pF, or 10 nF (0.01 µF). Likewise 102 is 1 nF, 473 is 47 nF and 105 is 1 µF.
It is the tolerance: J is ±5%, K is ±10%, M is ±20%. 104K is therefore 100 nF ±10%.
It is an EIA voltage code: 2A is 100 V. Other common codes: 1C 16 V, 1E 25 V, 1H 50 V, 2D 200 V, 2E 250 V, 2G 400 V, 2J 630 V.
1 nF = 1 000 pF and 1 µF = 1 000 nF = 1 000 000 pF. So 4 700 pF is 4.7 nF (marked 472 or 4n7) and 0.1 µF is 100 nF.








